Like any major appliance in the home the garage door and the garage door opener should be regularly maintained to prevent poor service or possible failure. To begin maintenance, tell everyone in the home your plan to work on the garage door or opener to prevent any possible injury. The first step to garage door maintenance is simple: stand inside the garage with the garage door closed; inspect the springs, rollers, pulleys and all of the mounting hardware for both the garage door and the opener. If there are any signs of damage or noticeable wear to these components, it may be time to call your garage door professional to replace the damaged or worn components (Remember garage doors are held up under a lot of tension, and a trained professional should be called to replace damaged hardware to prevent any possible injury to the homeowner).

The balance of the garage door should also be regularly checked to ensure the garage door is opening and closing with no resistance along its track. With the garage door closed, disconnect the automatic door opener, and, with the automatic door opener disconnected, lift the garage door manually into an open position. If the door moves smoothly and freely into the upward position, the door is in alignment. If, however, the door catches and drags on the rails, a trained garage door technician should properly service the door.

The garage door’s reversing mechanism – devices which have been added to all garage doors built after 1993 and are responsible for the prevention of the possible entrapment of a person under the garage door – should also be tested regularly. To test the door’s reversing mechanism, open the garage door and place a two by four on the garage floor directly in the path of the garage door. With the two by four in place, close the garage door onto it. When the garage door falls on the two by four and makes contact, the garage door should retreat back up on the track into the open position. If the door does not immediately retract, call your garage door service technician to fix the reversing mechanism.

On a final note, a small amount of lubrication can be added to all of the garage doors moving parts. Make sure that the garage door is either in a fully opened or closed position while working on the garage door, and stand clear of the garage door and all of the moving parts when the garage door is activated.

The post Garage Door Opener Maintenance appeared first on Bailey Garage Doors.

It’s common for garage doors to need regular maintenance, but even with a consistent maintenance schedule, the hardware on the garage door can become loose or begin to wear out.  Usually you will know the hardware is damaged or loose, because the garage door will shudder in its track, or it may even get stuck halfway up (a stuck garage door is also a symptom for other door problems).  Think of it as a garage door tune-up, and here are a few ways to do it.

First, with the garage door in the closed position (if someone might accidentally turn on the garage door while you are working on it, it may be wise to disconnect the garage door opener) tighten down all of the hardware.  Usually the hardware that causes the most trouble will be near the track, where the continual jarring of the door moving up and down may loosen it.  A socket set and a wrench should be the right tools for the job.  However, be sure, when you are tightening down the hardware, that you don’t over tighten any of the screws or bolts, because this could strip the threads.

If the door is especially noisy near the track, it may be time to replace the rollers and the hinges.  For most people this will be a job for professionals, and the garage door technicians at Bailey Garage Door can certainly handle this job.  If you choose to do this yourself, you can contact Bailey Garage Doors for the necessary hardware for the job.  Use caution if you are replacing the rollers, and only replace one roller at a time.  If your door has tension springs at the header, a job like this can be dangerous, and you should refer to a professional to do the job.  Mishandling tension springs could cost you serious injury.

Garage Doors like the kind found at Bailey’s can last for years if kept up with regular maintenance.  If you think that your garage door is having problems, and you have been unable to diagnose the problem yourself, call Bailey Garage Doors, and rely on the experience of their garage door technicians.

The post A Noisy or Shuddering Garage Door appeared first on Bailey Garage Doors.

What’s stored in the garage?

Mice can build little nests in the most cramped of spaces. Going into your garage you should look at what’s being store there.  Are there old pieces of furniture? Do you store boxes or other loose trash there? Is there a woodpile stocked in the garage? All of these places make for excellent mouse habitat. First, clean out the garage, specifically what’s on the floor. While mice can take up residence about anywhere, place like a cardboard box stuffed with tissue or even the pile of dead grass and leaves beneath the lawnmower are nothing more than future rodent residencies. Also, wood stacked in the garage is convenient for those cold days, but it’s also providing a comfortable nook for mice to sleep.

Clean the Garage

Mice are drawn to the smells of most things, especially food, trash, or dog food. Keep the garage clean of bags of trash. Also, if you store food in the garage, make sure everything is well-sealed. Loose food should be stored in cans or containers with a tight fitting lid. Dog foods should be also kept in a sealed container. Remember, Mice really, really love dog food—don’t give them a reason to come in for a meal.

If your garage is a mess and you’ve decided to clean it up, take precautions. You may already have mice, and mice can carry certain diseases like hantavirus, which can be transmitted to humans by breathing in the dust exposed to it.  It’s nothing to overly worry about, because diseases like these are very rare. However, when you’re cleaning, take simple precautions such as a breathing mask and keep the garage well-ventilated.

Contact Bailey Doors for all of your garage door needs.

The post Fall Garage Cleaning Tips appeared first on Bailey Garage Doors.

First of all, it’s important to give the garage door a look and listen test.  When you open and close the door are there any strange sounds?  Does the door move smoothly in its track?  If the door’s making a rubbing sound, try to locate the sound—eyes only, don’t put hands anywhere near the moving parts of a garage door!  Also, if the door comes jarringly up the track, check the track when the door is in a down position.  Both sides of the garage door’s moving parts—springs, cables, and pulleys—should look symmetrical.

It’s a common problem for a garage door to have problems with the springs.  Springs are under intense pressures and often, because of this, the springs can wear out or break over time.  A worn spring could cause the garage door to stick in its track, or open and close jarringly.  To check the springs, disable the garage door opener, and lift the garage door halfway up into its track.  If the door balances there, the springs are in good condition.  If the door doesn’t balance, it’s often the springs, and, because springs are a notoriously dangerous component to fix, it is important to call a professional.

It’s also important to keep the garage door and the moving components lubricated.  There should never be any lubricant applied to the track.  This can do more harm than it would do good.  The track can be wiped clean, but lubricant could cause the door to slip in its track.  Lubricants can be applied to all the moving parts of the garage door.  For Garage door opener models, like Screw and Chain Drive models, it is also important to lubricate this component.

Also, make sure that all of the safety components are working properly.  The safety sensors should be working appropriately: the sensors are lit with green lights and the door can be closed by pressing the garage door opener.

Visit Bailey Garage Doors for all of your garage door needs.

The post Garage Door Maintenance Billings MT appeared first on Bailey Garage Doors.

There are many obvious choices as to why a commercial garage door is needed: shops and other places where bigger vehicles are constantly pulled into and out of the garage, loading and unloading areas, etc.

If you own a business or have a home shop you probably already have a commercial garage door in place, so, why would you need a new one?  Newer commercial garage doors are well-insulated.

Models today can be built with polyurethane foams and thermal breaks, which, just like the insulation in the walls of the shop, business, home, etc., help to reduce energy costs. For those of you running a business you know that every penny counts, so putting in a new garage door—even though there may be some upfront cost for the door and opener—that door will save you money, and help your business to become environmentally friendly.

Commercial garage door openers are built for repetitive use: consider the mechanic who opens and closes the garage door periodically throughout the day; he is going to need a garage door opener that is built to withstand the repetitive abuse.

We carry three types of commercial openers: Jackshaft (J) Style Operator (optimal for industrial applications), Trolley (T) Style Operator (Optimal for general industrial applications for doors built in sections), and Hoist (H) Style Operator (optimal for industrial applications, with the added accessory of a chain that can be used to manually operate the garage door in the event of a power outage).

For Commercial Garage Doors, we carries three types: Thermally-Broken insulated steel sandwich door, Sandwich construction polystyrene models, and Ribbed steel models.  If you are unsure which model will best suit your needs, call the garage door professionals at Bailey Garage Doors.

The post Commercial Garage Doors Billings MT appeared first on Bailey Garage Doors.

A Garage Door’s spring is a mechanical component to the garage door, and because of the pressures placed upon it to both raise and lower the door, the springs will eventually go bad. The problem with garage door springs is that it’s not the easiest component to fix. As we’ve talked about here before, because of the pressures behind those springs, for the amateur, or even professional for that matter, those springs can represent serious bodily pain, loss of limb or maybe even life. It’s best to call a professional if you don’t have either the knowledge or practice replacing these springs.

When a spring does break, it could be at the worst possible time—when you are hoping to leave for work, school, etc. You will know a spring has broken when the garage door wont open or close—this could also be a sign of other problems such as a faulty garage door opener, etc., and the list of ways in which to troubleshoot a stuck garage door can be found in February’s blog post. If you’ve determined that the spring is at fault, call a professional technician at Bailey’s Garage Door. If you continue to try and engage the spring by continuing to try to open and close the garage door, it could do severe damage to the door.

So, how do you prevent this moment in time in which you’re stuck with a broken garage door, hoping that a Garage Door Technician is available soon! There may have been warning signs before the door became stuck, warning signs that you could have caught early, and avoided the stuck disaster. Unfortunately, however, garage door springs wont break in standard ways, but often it might provide clues as to its wear. Firstly, if your garage door is stopping as it’s opening or closing this could be a sign of a damaged spring. Check the springs when the door is fully closed, and look for any noticeable damage or wear to the spring. Another clue is how the door is situated in the opening. Is the door crooked? Does it seem to be off its track? These could be definite clues that point to a faulty spring. Also, there’s the standard practice of if it looks broke then fix it! If there’s noticeable wear, or if you’ve had a simple accident such as backing into the door, or clipping the door with your car as you passed underneath, this would be a definite time to have the springs checked, and, possibly, replaced. You don’t want to find yourself with your car stuck in or just outside the garage at a time of emergency.

For all of your garage doors needs, please contact Bailey Doors today!

The post Garage Door Springs Billings MT appeared first on Bailey Garage Doors.

Today’s real estate market is steady: it’s rising—for now anyway—and potential sellers are faced with considerable inventory still backlogged from a time when people struggled to sell homes for bottom-barrel prices. So, it’s important that a potential home stand out from the rest. A quality garage door from Bailey Garage Doors, grinning bright and new like a bright-white smile, greeting potential buyers, would seem to go far in today’s market. And, it may also set a home apart on price.

Also, is the door opener functioning properly? Are the safety measures such as the safety sensors functioning properly? This is important to new buyers: most buyers don’t want to buy a home they’ll have to invest considerable extra money for repairs. Check the safety sensors. The lights on the sensors should be green. Place an object in the way of the sensors and try to close the door. If the sensors are in working condition, the door wont be able to close properly on the object. Make sure to keep your hand on the opener switch, however, if the sensors are out of alignment, and the door closes without activating its sensors. Also, make sure that the door both recedes back up into the track and descends back into a closed position smoothly. If there’s a mechanical issue with the door, give a professional a call. Many garage door parts like a broken spring are best fixed by someone with the knowledge to do so, because the components are under such pressures that if mishandled it could cause serious injury or even death.  Call Bailey Doors today for all of your garage door needs! (406) 656-2905

The post Update Your Garage Door For Curb Appeal appeared first on Bailey Garage Doors.

The post Is Your Garage Door Sticking? appeared first on Bailey Garage Doors.

The cold weather of winter is here. The snow is on the ground, people are out shopping in stores that play jingle bells on continuous, others tether bright flashing lights from their rain gutters and plant a big light up Santa with Reindeer in the yard. The beginning of winter means the cheery holiday season, but it can also have far less cheery connotations for your home’s garage doors. Cold weather is a likely culprit for garage door failure. Cold temperatures—below 35 degrees—can cause the oil that lubricates the garage door motor to thicken and the motor could seize. Also, cold weather could cause the metal parts that make a garage door function—leaf springs, screws, tracks, and other metal components—seize up, because the cold air cause the metal parts to contract. Also, a Garage doors springs have a good likelihood of breaking during the cold months.

Another common issue in winter is the possible fogging of the Garage Door sensors (sensors that project a beam of light, that, when broken, stalls out the descent of the garage door to prevent accidental closure on a person or things). Make sure that the sensors are fog free and also that everything is out of the path of the sensors. Often, people have a tendency to keep items like the snow shovel near the front of the garage for easy access.

Also, when the weather is warmer during the day and the snow and ice melt, water can get under the garage door and refreeze as soon as the temperatures drop back down. This can freeze the garage door down onto the pavement. The door may still open when the opener is pressed, but the ice may tear away the seal at the bottom of the door. This component can be replaced and, or, if its undamaged, put back into place. Make sure before you open the door that the door is not frozen down. you wouldn’t want to be caught in the predicament of having to leave an open, damaged garage door.  If you are experiencing garage door problems this winter, please contact Bailey Garage Doors today!

The post Common Garage Door Problems In The Winter appeared first on Bailey Garage Doors.

Garage workshops can be as simple as two sawhorses and a crosscut hand saw to a full mechanical and electrical woodworking shop. Either way, the tools within that shop will need to be protected. An intensive home woodworking shop may have everything from expensive motor driven saws to air circulation and dust collection. The garage door is all that stands between all of that expensive equipment and the outside. If the garage door is broken, or if the garage door isn’t equipped with the necessary safety features, those tools could be at risk.

Modern Garage door openers have helped to prevent break-ins from thieves. In the past, thieves could drive down a street pressing the button on a garage door opener, and if they drove past someone with the same garage door opener as they had, the door would open. Now, garage door transmitters are built for the opener. When the button on the transmitter is pressed, a code is sent to the garage door opener. There are over a billion codes that relay between the transmitter and the opener, so it is a low risk that someone could easily determine what code to use to open the door.

The post DIY Garage Workshops appeared first on Bailey Garage Doors.