Here is a look at what causes a garage door to come off its track.

Reason #1: Car Hitting the Door

Garage doors are big and tough. It takes a lot to get them off their hinges. So it makes sense that, in most cases, a car has hit the door. And it’s easier to do than you might think.

Have you ever been later for an appointment and in a hurry? You can pull out of the garage, or perhaps enter it, going too fast. If the door isn’t totally up, a crash is inevitable. Or you can forget to click the remote to open the door.

Reason #2: Improper Alignment or Weak Tracks

If the horizontal tracks on the garage door system aren’t sturdy enough, they can bend under the weight of the door. This happens when they are poorly made, using weak steel.

If the tracks are improperly aligned, they can also bend. Bolts in the brackets get loose, causing wobbling and finally breaking.

Reason #3: Worn Out Rollers

The rollers for your garage door can wear out and break, causing structural stress. Some fittings don’t have enough or the right type of ball bearings.

Reason #4: Broken Lift Cable

Older doors have parts that are worn out, especially around the lift cables. Old parts can cause of series of problems with various pieces of the door system. The end result is a garage door off its tracks.

The Importance of Garage Door Inspections

A garage door off its tracks is expensive to repair. It makes sense to get regular inspections of the components and system as a whole. Expert technicians can spot problems early, preventing damage and even injury.

Contact Bailey Garage Doors for all of your garage door needs!

The post Why Did My Garage Door Come Off Its Tracks? appeared first on Bailey Garage Doors.

Extra Ceiling Space

Make your garage more of a fully three-dimensional storage space by installing ledges on the ceiling that can hold storage boxes. The ledges look like I-beams, and can hold more room than you would’ve thought possible; this really declutters a house when done correctly.

Erect a Do It Yourself Work Bench on the Wall

This can be embedded right in the wall, so that you never need search for your tools again, more or less. This idea of making use of the preexisting wall can be extended to a place for all of your garden tools, as well. You’ve got at least three walls to work with, after all. Turn one entire wall into a storage space by nailing ledges to it.

Turn It Into an Extra Work Room

If you don’t need to park your vehicles in the garage, then it’s large enough to convert into an ample-sized office. Put in carpeting and build desks and cabinets into the wall. Just in case you already have an adequate office in the main house, then your garage can make a very nice home gym.

Change the Lights

Most garages have fluorescent lighting; but if you are upgrading it into an office or work room, then you should replace these with LEDs. they last a lot longer and are more efficient; plus, the right colors simulate natural light much better.

These are some of the top upgrades you’ll find in most garages; there are others, but they depend on specific uses you might have for in your particular case.

The post Top Ways to Upgrade Just About Any Garage appeared first on Bailey Garage Doors.

As it turns out, there’s quite a bit you can do when this happens to you.

First of all, most garage door openers provide a way to disable remote controls when something like this happens. There should be a button located on your garage door motor’s housing that should do the trick. The color and appearance of this button will vary depending on the brand of garage door opener you have, but pushing and holding it for a couple of seconds should deprogram all remote controls connected to it. You can then reprogram all remote controls and keypads you have so they can still be used.

If you don’t want to go through the trouble of reprogramming all of your remaining keypads and remotes, you can always use the LOCK function on your garage door opener to disable all remotes. This won’t solve your problem if you ever unlock your garage door opener, but it will temporarily deter the thief who stole your remote in the first place. This might also come in handy if you aren’t sure if your remote was actually stolen; simply LOCK your garage door until you’ve either found your remote or you’re sure it was taken.

Of course, the best way to solve this problem is to prevent it from happening in the first place. Be proactive by locking your car doors at all times, and keep your garage door opener remote out of sight. If you have the options of placing a mini-remote on your keychain, do that instead of keeping a remote in your car. A mini-remote that you keep on your person will be a lot harder to steal than one that is kept in your car.

Please contact Bailey Doors today for all of your garage door needs.

The post Someone stole my remote! My home and belongings are in danger! What should I do? appeared first on Bailey Garage Doors.

Like any major appliance in the home the garage door and the garage door opener should be regularly maintained to prevent poor service or possible failure. To begin maintenance, tell everyone in the home your plan to work on the garage door or opener to prevent any possible injury. The first step to garage door maintenance is simple: stand inside the garage with the garage door closed; inspect the springs, rollers, pulleys and all of the mounting hardware for both the garage door and the opener. If there are any signs of damage or noticeable wear to these components, it may be time to call your garage door professional to replace the damaged or worn components (Remember garage doors are held up under a lot of tension, and a trained professional should be called to replace damaged hardware to prevent any possible injury to the homeowner).

The balance of the garage door should also be regularly checked to ensure the garage door is opening and closing with no resistance along its track. With the garage door closed, disconnect the automatic door opener, and, with the automatic door opener disconnected, lift the garage door manually into an open position. If the door moves smoothly and freely into the upward position, the door is in alignment. If, however, the door catches and drags on the rails, a trained garage door technician should properly service the door.

The garage door’s reversing mechanism – devices which have been added to all garage doors built after 1993 and are responsible for the prevention of the possible entrapment of a person under the garage door – should also be tested regularly. To test the door’s reversing mechanism, open the garage door and place a two by four on the garage floor directly in the path of the garage door. With the two by four in place, close the garage door onto it. When the garage door falls on the two by four and makes contact, the garage door should retreat back up on the track into the open position. If the door does not immediately retract, call your garage door service technician to fix the reversing mechanism.

On a final note, a small amount of lubrication can be added to all of the garage doors moving parts. Make sure that the garage door is either in a fully opened or closed position while working on the garage door, and stand clear of the garage door and all of the moving parts when the garage door is activated.

The post Garage Door Opener Maintenance appeared first on Bailey Garage Doors.

Garage doors are opened daily, and, unlike the rest of our home, when the garage door is opened anyone with a view from the street is aware of the things we keep in the garage. People often forget to close the garage door when they leave, or maybe they have a forgetful teenager to blame, either way, keeping that door closed is paramount to prevent any crimes of opportunity from taking place. Your garage door technician can install a timer that will close your garage door for you after a predetermined amount of time. This will not forgo the safety mechanism put in place on the garage door like the garage door safety sensors, which prevent any accidental closure on people or objects (assuming that the safety sensors are working correctly). The timer has an override option if you wish for the door to remain open while you work, clean, etc.

When you are going on vacation, you should unplug your garage door opener. And, with the opener unplugged, you can put a padlock on the latch or run a metal bolt through a hole in the track to ensure that the door will not be opened from the outside.

Another thing that many people forget about is the garage door opener on the visor of their vehicle. That opener is hidden behind just a pane of glass. Remember to take the opener in the house with you, especially removing it from the vehicle if you are on vacation and the vehicle is going to be parked outside of the home.

The post Garage Door Safety appeared first on Bailey Garage Doors.

First of all, it’s important to give the garage door a look and listen test.  When you open and close the door are there any strange sounds?  Does the door move smoothly in its track?  If the door’s making a rubbing sound, try to locate the sound—eyes only, don’t put hands anywhere near the moving parts of a garage door!  Also, if the door comes jarringly up the track, check the track when the door is in a down position.  Both sides of the garage door’s moving parts—springs, cables, and pulleys—should look symmetrical.

It’s a common problem for a garage door to have problems with the springs.  Springs are under intense pressures and often, because of this, the springs can wear out or break over time.  A worn spring could cause the garage door to stick in its track, or open and close jarringly.  To check the springs, disable the garage door opener, and lift the garage door halfway up into its track.  If the door balances there, the springs are in good condition.  If the door doesn’t balance, it’s often the springs, and, because springs are a notoriously dangerous component to fix, it is important to call a professional.

It’s also important to keep the garage door and the moving components lubricated.  There should never be any lubricant applied to the track.  This can do more harm than it would do good.  The track can be wiped clean, but lubricant could cause the door to slip in its track.  Lubricants can be applied to all the moving parts of the garage door.  For Garage door opener models, like Screw and Chain Drive models, it is also important to lubricate this component.

Also, make sure that all of the safety components are working properly.  The safety sensors should be working appropriately: the sensors are lit with green lights and the door can be closed by pressing the garage door opener.

Visit Bailey Garage Doors for all of your garage door needs.

The post Garage Door Maintenance Billings MT appeared first on Bailey Garage Doors.

There are many obvious choices as to why a commercial garage door is needed: shops and other places where bigger vehicles are constantly pulled into and out of the garage, loading and unloading areas, etc.

If you own a business or have a home shop you probably already have a commercial garage door in place, so, why would you need a new one?  Newer commercial garage doors are well-insulated.

Models today can be built with polyurethane foams and thermal breaks, which, just like the insulation in the walls of the shop, business, home, etc., help to reduce energy costs. For those of you running a business you know that every penny counts, so putting in a new garage door—even though there may be some upfront cost for the door and opener—that door will save you money, and help your business to become environmentally friendly.

Commercial garage door openers are built for repetitive use: consider the mechanic who opens and closes the garage door periodically throughout the day; he is going to need a garage door opener that is built to withstand the repetitive abuse.

We carry three types of commercial openers: Jackshaft (J) Style Operator (optimal for industrial applications), Trolley (T) Style Operator (Optimal for general industrial applications for doors built in sections), and Hoist (H) Style Operator (optimal for industrial applications, with the added accessory of a chain that can be used to manually operate the garage door in the event of a power outage).

For Commercial Garage Doors, we carries three types: Thermally-Broken insulated steel sandwich door, Sandwich construction polystyrene models, and Ribbed steel models.  If you are unsure which model will best suit your needs, call the garage door professionals at Bailey Garage Doors.

The post Commercial Garage Doors Billings MT appeared first on Bailey Garage Doors.

Today’s real estate market is steady: it’s rising—for now anyway—and potential sellers are faced with considerable inventory still backlogged from a time when people struggled to sell homes for bottom-barrel prices. So, it’s important that a potential home stand out from the rest. A quality garage door from Bailey Garage Doors, grinning bright and new like a bright-white smile, greeting potential buyers, would seem to go far in today’s market. And, it may also set a home apart on price.

Also, is the door opener functioning properly? Are the safety measures such as the safety sensors functioning properly? This is important to new buyers: most buyers don’t want to buy a home they’ll have to invest considerable extra money for repairs. Check the safety sensors. The lights on the sensors should be green. Place an object in the way of the sensors and try to close the door. If the sensors are in working condition, the door wont be able to close properly on the object. Make sure to keep your hand on the opener switch, however, if the sensors are out of alignment, and the door closes without activating its sensors. Also, make sure that the door both recedes back up into the track and descends back into a closed position smoothly. If there’s a mechanical issue with the door, give a professional a call. Many garage door parts like a broken spring are best fixed by someone with the knowledge to do so, because the components are under such pressures that if mishandled it could cause serious injury or even death.  Call Bailey Doors today for all of your garage door needs! (406) 656-2905

The post Update Your Garage Door For Curb Appeal appeared first on Bailey Garage Doors.

The cold weather of winter is here. The snow is on the ground, people are out shopping in stores that play jingle bells on continuous, others tether bright flashing lights from their rain gutters and plant a big light up Santa with Reindeer in the yard. The beginning of winter means the cheery holiday season, but it can also have far less cheery connotations for your home’s garage doors. Cold weather is a likely culprit for garage door failure. Cold temperatures—below 35 degrees—can cause the oil that lubricates the garage door motor to thicken and the motor could seize. Also, cold weather could cause the metal parts that make a garage door function—leaf springs, screws, tracks, and other metal components—seize up, because the cold air cause the metal parts to contract. Also, a Garage doors springs have a good likelihood of breaking during the cold months.

Another common issue in winter is the possible fogging of the Garage Door sensors (sensors that project a beam of light, that, when broken, stalls out the descent of the garage door to prevent accidental closure on a person or things). Make sure that the sensors are fog free and also that everything is out of the path of the sensors. Often, people have a tendency to keep items like the snow shovel near the front of the garage for easy access.

Also, when the weather is warmer during the day and the snow and ice melt, water can get under the garage door and refreeze as soon as the temperatures drop back down. This can freeze the garage door down onto the pavement. The door may still open when the opener is pressed, but the ice may tear away the seal at the bottom of the door. This component can be replaced and, or, if its undamaged, put back into place. Make sure before you open the door that the door is not frozen down. you wouldn’t want to be caught in the predicament of having to leave an open, damaged garage door.  If you are experiencing garage door problems this winter, please contact Bailey Garage Doors today!

The post Common Garage Door Problems In The Winter appeared first on Bailey Garage Doors.

Wood garage doors are beautiful, although garage doors made entirely of wood do require upkeep, and are not as durable as doors built of steel. Wood Accent Garage doors, by CHI, provide the natural look of wood, giving your home that curbside look of sophistication and warmth, although the doors are not made entirely of wood. The Accents Wood Grain finishes make the door appear as if it is made of wood, but it is entirely built of steel. This allows the homeowner to have the best of both worlds, in a sense: the look of wood and the durability of steel. The Wood Accent Garage Door is available in the colors: Cedar, Mahogany, Light Oak, and Dark Oak. CHI also offers a wood plank look, which is available in the same four different color options as the Accents Wood Grain finished doors.

CHI Garage Doors also makes garage doors with a displayed image. These images allow the homeowner to display their true personality. The images are based on the following four categories: Destinations, Patriotic, Sportsman, and Patterns. In the category of the Sportsman, for instance, you will find an image of a golf scene: serene, bright green fairway with the putting green, pin, and hole shown far in the distance, or an image of dawn on a lake and two men (seen only as black outlines in the new morning light) are casting fishing poles from a boat out into the lake. The Patriotic images include American Flags, and bald eagles, while the Pattern option has unique designs and even camouflage. CHI can also place your favorite Major League Baseball team’s logo on the front of the garage door, so the rest of the neighborhood will have little doubt to which team you cheer for.

The post CHI Garage Doors appeared first on Bailey Garage Doors.