Here is a look at what causes a garage door to come off its track.

Reason #1: Car Hitting the Door

Garage doors are big and tough. It takes a lot to get them off their hinges. So it makes sense that, in most cases, a car has hit the door. And it’s easier to do than you might think.

Have you ever been later for an appointment and in a hurry? You can pull out of the garage, or perhaps enter it, going too fast. If the door isn’t totally up, a crash is inevitable. Or you can forget to click the remote to open the door.

Reason #2: Improper Alignment or Weak Tracks

If the horizontal tracks on the garage door system aren’t sturdy enough, they can bend under the weight of the door. This happens when they are poorly made, using weak steel.

If the tracks are improperly aligned, they can also bend. Bolts in the brackets get loose, causing wobbling and finally breaking.

Reason #3: Worn Out Rollers

The rollers for your garage door can wear out and break, causing structural stress. Some fittings don’t have enough or the right type of ball bearings.

Reason #4: Broken Lift Cable

Older doors have parts that are worn out, especially around the lift cables. Old parts can cause of series of problems with various pieces of the door system. The end result is a garage door off its tracks.

The Importance of Garage Door Inspections

A garage door off its tracks is expensive to repair. It makes sense to get regular inspections of the components and system as a whole. Expert technicians can spot problems early, preventing damage and even injury.

Contact Bailey Garage Doors for all of your garage door needs!

The post Why Did My Garage Door Come Off Its Tracks? appeared first on Bailey Garage Doors.

As it turns out, there’s quite a bit you can do when this happens to you.

First of all, most garage door openers provide a way to disable remote controls when something like this happens. There should be a button located on your garage door motor’s housing that should do the trick. The color and appearance of this button will vary depending on the brand of garage door opener you have, but pushing and holding it for a couple of seconds should deprogram all remote controls connected to it. You can then reprogram all remote controls and keypads you have so they can still be used.

If you don’t want to go through the trouble of reprogramming all of your remaining keypads and remotes, you can always use the LOCK function on your garage door opener to disable all remotes. This won’t solve your problem if you ever unlock your garage door opener, but it will temporarily deter the thief who stole your remote in the first place. This might also come in handy if you aren’t sure if your remote was actually stolen; simply LOCK your garage door until you’ve either found your remote or you’re sure it was taken.

Of course, the best way to solve this problem is to prevent it from happening in the first place. Be proactive by locking your car doors at all times, and keep your garage door opener remote out of sight. If you have the options of placing a mini-remote on your keychain, do that instead of keeping a remote in your car. A mini-remote that you keep on your person will be a lot harder to steal than one that is kept in your car.

Please contact Bailey Doors today for all of your garage door needs.

The post Someone stole my remote! My home and belongings are in danger! What should I do? appeared first on Bailey Garage Doors.

Like any major appliance in the home the garage door and the garage door opener should be regularly maintained to prevent poor service or possible failure. To begin maintenance, tell everyone in the home your plan to work on the garage door or opener to prevent any possible injury. The first step to garage door maintenance is simple: stand inside the garage with the garage door closed; inspect the springs, rollers, pulleys and all of the mounting hardware for both the garage door and the opener. If there are any signs of damage or noticeable wear to these components, it may be time to call your garage door professional to replace the damaged or worn components (Remember garage doors are held up under a lot of tension, and a trained professional should be called to replace damaged hardware to prevent any possible injury to the homeowner).

The balance of the garage door should also be regularly checked to ensure the garage door is opening and closing with no resistance along its track. With the garage door closed, disconnect the automatic door opener, and, with the automatic door opener disconnected, lift the garage door manually into an open position. If the door moves smoothly and freely into the upward position, the door is in alignment. If, however, the door catches and drags on the rails, a trained garage door technician should properly service the door.

The garage door’s reversing mechanism – devices which have been added to all garage doors built after 1993 and are responsible for the prevention of the possible entrapment of a person under the garage door – should also be tested regularly. To test the door’s reversing mechanism, open the garage door and place a two by four on the garage floor directly in the path of the garage door. With the two by four in place, close the garage door onto it. When the garage door falls on the two by four and makes contact, the garage door should retreat back up on the track into the open position. If the door does not immediately retract, call your garage door service technician to fix the reversing mechanism.

On a final note, a small amount of lubrication can be added to all of the garage doors moving parts. Make sure that the garage door is either in a fully opened or closed position while working on the garage door, and stand clear of the garage door and all of the moving parts when the garage door is activated.

The post Garage Door Opener Maintenance appeared first on Bailey Garage Doors.

It’s common for garage doors to need regular maintenance, but even with a consistent maintenance schedule, the hardware on the garage door can become loose or begin to wear out.  Usually you will know the hardware is damaged or loose, because the garage door will shudder in its track, or it may even get stuck halfway up (a stuck garage door is also a symptom for other door problems).  Think of it as a garage door tune-up, and here are a few ways to do it.

First, with the garage door in the closed position (if someone might accidentally turn on the garage door while you are working on it, it may be wise to disconnect the garage door opener) tighten down all of the hardware.  Usually the hardware that causes the most trouble will be near the track, where the continual jarring of the door moving up and down may loosen it.  A socket set and a wrench should be the right tools for the job.  However, be sure, when you are tightening down the hardware, that you don’t over tighten any of the screws or bolts, because this could strip the threads.

If the door is especially noisy near the track, it may be time to replace the rollers and the hinges.  For most people this will be a job for professionals, and the garage door technicians at Bailey Garage Door can certainly handle this job.  If you choose to do this yourself, you can contact Bailey Garage Doors for the necessary hardware for the job.  Use caution if you are replacing the rollers, and only replace one roller at a time.  If your door has tension springs at the header, a job like this can be dangerous, and you should refer to a professional to do the job.  Mishandling tension springs could cost you serious injury.

Garage Doors like the kind found at Bailey’s can last for years if kept up with regular maintenance.  If you think that your garage door is having problems, and you have been unable to diagnose the problem yourself, call Bailey Garage Doors, and rely on the experience of their garage door technicians.

The post A Noisy or Shuddering Garage Door appeared first on Bailey Garage Doors.

The cold weather of winter is here. The snow is on the ground, people are out shopping in stores that play jingle bells on continuous, others tether bright flashing lights from their rain gutters and plant a big light up Santa with Reindeer in the yard. The beginning of winter means the cheery holiday season, but it can also have far less cheery connotations for your home’s garage doors. Cold weather is a likely culprit for garage door failure. Cold temperatures—below 35 degrees—can cause the oil that lubricates the garage door motor to thicken and the motor could seize. Also, cold weather could cause the metal parts that make a garage door function—leaf springs, screws, tracks, and other metal components—seize up, because the cold air cause the metal parts to contract. Also, a Garage doors springs have a good likelihood of breaking during the cold months.

Another common issue in winter is the possible fogging of the Garage Door sensors (sensors that project a beam of light, that, when broken, stalls out the descent of the garage door to prevent accidental closure on a person or things). Make sure that the sensors are fog free and also that everything is out of the path of the sensors. Often, people have a tendency to keep items like the snow shovel near the front of the garage for easy access.

Also, when the weather is warmer during the day and the snow and ice melt, water can get under the garage door and refreeze as soon as the temperatures drop back down. This can freeze the garage door down onto the pavement. The door may still open when the opener is pressed, but the ice may tear away the seal at the bottom of the door. This component can be replaced and, or, if its undamaged, put back into place. Make sure before you open the door that the door is not frozen down. you wouldn’t want to be caught in the predicament of having to leave an open, damaged garage door.  If you are experiencing garage door problems this winter, please contact Bailey Garage Doors today!

The post Common Garage Door Problems In The Winter appeared first on Bailey Garage Doors.

Wood garage doors are beautiful, although garage doors made entirely of wood do require upkeep, and are not as durable as doors built of steel. Wood Accent Garage doors, by CHI, provide the natural look of wood, giving your home that curbside look of sophistication and warmth, although the doors are not made entirely of wood. The Accents Wood Grain finishes make the door appear as if it is made of wood, but it is entirely built of steel. This allows the homeowner to have the best of both worlds, in a sense: the look of wood and the durability of steel. The Wood Accent Garage Door is available in the colors: Cedar, Mahogany, Light Oak, and Dark Oak. CHI also offers a wood plank look, which is available in the same four different color options as the Accents Wood Grain finished doors.

CHI Garage Doors also makes garage doors with a displayed image. These images allow the homeowner to display their true personality. The images are based on the following four categories: Destinations, Patriotic, Sportsman, and Patterns. In the category of the Sportsman, for instance, you will find an image of a golf scene: serene, bright green fairway with the putting green, pin, and hole shown far in the distance, or an image of dawn on a lake and two men (seen only as black outlines in the new morning light) are casting fishing poles from a boat out into the lake. The Patriotic images include American Flags, and bald eagles, while the Pattern option has unique designs and even camouflage. CHI can also place your favorite Major League Baseball team’s logo on the front of the garage door, so the rest of the neighborhood will have little doubt to which team you cheer for.

The post CHI Garage Doors appeared first on Bailey Garage Doors.

C.H.I Overhead Garage Doors has numerous styles that will fit any homeowners needs. Most homeowners will choose the roll-up type of garage door, which is a garage door that, when opened, goes upward into a track, and, when closed, travels back down the same track. Other doors, such as carriage house-style garage doors open outward from the garage door opening. A carriage house-style garage door is a traditional door, and most carriage house doors have a truly traditional look. You can also purchase a roll-up style of garage door that has a traditional carriage house look, complete with the iconic hardware to the front of the garage door.

 C.H.I Garage Doors also have numerous style choices for the front of the garage door. While these doors are made of steel, doors can be purchased with raised or inset panels. The door can be accessorized with traditional cast hinges or simple and plain—doors that are super-sleek and modern-looking. For the traditional look, or just a truly custom look, the doors can be built with arched windows—similar to the traditional carriage house-style look—as well as rectangular, crisp-lined modern looking windows. Also, you can purchase C.H.I in numerous colors. The door can have a painted, simple appearance that comes close to matching or contrasting—depending on your tastes—the exterior of your home. Or, the door can be finished in a look that has the appearance of traditional wood, although it’s still a steel garage door—safe, functional, and lasting.

Please visit Bailey Garage Doors for all of your garage doors needs!

The post Garage Doors Are A Good Investments appeared first on Bailey Garage Doors.

The springs are still dangerous for a professional garage door technician to replace. When a technician replaces the broken springs, he has to assume that the tension springs will break when he unwinds them. He will need to wear a set of safety glasses and keep his clothes and body parts well away from the springs. A component of the garage door called the winding cone keeps the tension spring in place. These cones can slip or even explode into many pieces and great care should be taken to prevent possible injury.

Extension springs, are built differently then tension springs, because these springs are held into place by safety cables. These cables help to control the broken spring, but even though it is in place for a safety precaution, the springs are still held up under a tremendous amount of pressure and a professional technician should probably be called in the event that one breaks.

Diagnosing a garage door spring problem is simple: does the door open and close smoothly? If the door is not operating smoothly, it is likely the tension springs. If the door is making noise, turn off the garage door opener and try open the garage door manually. If the garage door still makes noise the problem is likely the springs. It is also possible that a noisy garage door may just need some lubricant to be applied to the springs. The average home can easily diagnose and fix these simple problems with a garage doors springs, but even the most seasoned DIY’er should probably allow a garage door technician to fix the garage door spring when it breaks..

The post Garage Door Springs appeared first on Bailey Garage Doors.

The screw drive opener rides on a trolley that moves up and down a steel rod. The screw drive openers operate with much less force than other models. There are many advantages to the screw drive openers, and the main advantage is its simplicity. There are very few moving parts that the homeowner will need to maintain over the life of the opener.

Chain Drive openers are the most common and oldest of the garage door openers. The opener operates the door up and down by turning a chain (similar in appearance and operation to a bicycle chain) with one end of the chain connected to a part called the J-Arm, which is attached to the garage door itself, with the other end attached to the trolley. Chain drives are also the most economical garage door opener, and, while older chain drive garage door openers were loud, newer technology has quieted the starting and stopping motion of these openers.

Belt Drives are the quietest of the openers, and they operate in the same way as the chain drive openers. Instead of the chain, a belt is used. The belt drive has a sleek appearance, and, because the belt itself is made of a fiberglass, reinforced rubber, the vibrations caused from starting and stopping the garage door is greatly reduced.

All garage doors openers have pros and cons, and a homeowner should give preference to which opener fits both his lifestyle and his style.

The post Garage Door Openers appeared first on Bailey Garage Doors.

A common sign that the sensors need to be serviced or replaced occurs when the garage door will open properly by touching the wall switch, but when the switch is pressed to close the garage door, the door will start down the track a short distance and then retreat back into an open position. Holding down the switch may close a garage door with a faulty sensor, although the sensors will no longer prevent the door from closing upon someone or something.

Trouble Shooting

The garage can be a dusty place, and when dust covers the sensor it may not work properly. If the sensor appears dirty, wipe it clean with a clean cloth or paper towel. Another common problem with safety sensors is misalignment. The garage is a very busy place in any home, and these sensors can easily go unnoticed. If a person or object bumps the sensor, it may fall out of alignment. If one sensor is no longer pointed toward the matching sensor, it may need to be realigned. If any wires are showing around the sensor, or if the sensor appears to be damaged, you will need to call a professional to service the broken sensor.

Service

Bailey Garage Doors is proud to be one of Montana’s best garage door companies because of our reputation for quality. Our knowledgeable staff can fix any garage door issue you may have and our large inventory of parts can ensure that we have the part that you need.

The post Garage Door Safety Sensors appeared first on Bailey Garage Doors.