02 Jan Garage Door Tune Up Billings MT
Your garage door is probably the single largest moving object in your home. An automatic garage door opener will literally do all the heavy lifting for you when it comes to your garage door, but like all mechanical devices it requires regular maintenance if it is going to keep working like it should. The average garage door will move up and down over a thousand times a year, and that kind of usage will put significant wear and tear on anything.
A garage door should receive a tune-up at least once a year, and although that seems like a difficult task it becomes easier as long as you follow these simple steps.
Look for Problem Spots
The first step in your garage door tune-up is to look for any obvious problem spots in your garage door system. Rollers should be in working order, the seal around the door should be pliable and the door itself should not be dented or warped. Any parts that are overly worn or damaged should be replaced.
It is also important to disconnect the power to the garage door opener before looking over your garage door system. The last thing you want is to have your garage door to open while you’re working.
Lubricate the Roller
If you have metal rollers, they can be easily lubricated with WD-40. If you have vinyl or rubber rollers, you will have to use another lubricant since WD-40 can damage non-metal components.
Re-Align Locking Bars
Misaligned locking bars are common and can prevent the garage door from sliding into the slots on the door track and locking into place. If the locking bars are misaligned, loosen the screws on the guide brackets that hold the locking bars in place and tap them gently into place with a hammer until they are aligned with the slots. Tighten the screws when you’re finished.
Inspect and Clean Moving Parts
Your garage door has several moving parts, which is why it is subject to so much wear and tear. Loose bolts and screws will all need to be tightened, and any gummy parts will need to be removed and soaked in mineral spirits. To make sure all parts that are removed are put back in the right place, try to only remove one part at a time.
Lubricate Chains and Springs
The chains of a garage door system can be lubricated with white lithium grease, while the springs will require a silicone-based spray. The springs are under a lot of tension and can pose a safety hazard, so don’t be afraid to contact a professional to inspect or replace them safely.
For more information on garage door repairs or any of your garage door repairs, please follow us on Facebook or Twitter or feel free to contact us!
No Comments